Automatic specimen cutting machine for micro section
Application:PCB factory physical laboratory Metallurgical sample cutting (bare board)
Machine Features:
1、This machine adopts red light positioning, and can find the sample cutting point quickly and precisely.
2.This machine adopts PLC control system, machine works stably and easy operating.
3.Machine adopts drilling and routing principle to avoid sample deformation, in order to make sure the precision of the cutting.
4.During sample cutting, when operator set the sample size, the machine will cut automatically and finish working when the micro-section is finally get out by operator.
5.The infrared protection device will protect operator from wrong operation damage and protect safety.
型号 model | ISC-QY01 | ISC-QY02 | ISC-QY03 |
控制方式 control mode | PLC 人机 | PLC 人机 | PLC 人机 |
动力 power | 2800W | 3000W | 3200W |
喉深 depth | 280mm | 380mm | 380mm |
机台尺寸 machine dimension | 宽680*深520*高1400mm | 宽 680*深 620*高 1400mm | 宽 760*深 620*高 1400mm |
工作台面 working deck | 天然大理石 | 天然大理石 | 天然大理石 |
电源 power supply | 220V 及 110V 选配 | 220V 及 110V 选配 | 220V 及 110V 选配 |
样品尺寸 sample size | 5*5~45*45mm | 5*5~45*45mm | 5*5~50*50mm |
铣刀规格 router bit spec. | 直径 Diameter 2.0~2.4mm 刀柄 3.175mm | 直径 Diameter 2.0~2.4mm 刀柄 3.175mm | 直径 Diameter 2.0~2.4mm 刀柄 3.175mm |
转数 rotate speed | 24000rpm | 24000rpm | 30000rpm |
操作系统 language | 中英文切换 Chinese/English | 中英文切换 Chinese/English | 中英文切换 Chinese/English |
压力方式 press power type | 气动平压式 Pneumatic flat pressure type | 气动平压式 Pneumatic flat pressure type | 气动平压式 Pneumatic flat pressure type |
气压 air pressure | 0.5Mpa | 0.6Mpa | 0.6Mpa |
机台重量 weight | 230kg | 260kg | 300kg |
选配 option | 安全防压装置 Safety protection device | 配安全防压装置 Safety protection device | |
消耗品 consumable | PCB 铣刀：更换周期 80PCS 左右更换一次（不同的产品洗刀寿命不同） PCB router bit: cutting 80pcs micro-section need change 1 router bit (different sample might affect the router bit life span) 粉尘袋：建议每周清洁一次，6 个月更换一个。 Dust collection bag: it is recommended to clean once a week and replace one in 6 months. | ||
